Rods, sheets, tubes

d Download

Description

Nylon 6 produced by casting with the addition of molybdenum disulfide ( MoS2 ), thanks to which assumes best tribological characteristics. While maintaining the main features of Omniamid G is more resistant and more self-lubricating, it’s better machinable and is more resistant to UV rays.

Features

• Wear resistance, better than the PA 6 HR
• Tensile strength and compression are same as the Omniamid G, while the impact strength is higher, fatigue resistance is high
• Self-lubricating, low friction coefficient
• Aging resistance, good resistance to weathering and low temperature
• Gray

Weak Point

It is hygroscopic, although less than PA6 G. Because of molecular arrangements, the larger or thicker are the diameters, the better is the quality of the product, rather than those of small mass
 

Application

• Mechanical: thanks to the good mechanical properties and the possibility to obtain semi-finished pieces of large dimensions, this material is widely used for the production of large diameter gears, pulleys, wheels and anti-wear guides . For excellent abrasion resistance in the earth moving and construction machines is used for gears, guides, bearings, brackets etc.
  In shipbuilding industry thanks to excellent weather resistance is used to obtain rollers, towing, guides, bushings. In the ropeway industry for pulleys, wheels, slides, etc.
• Food: can not be used in contact with food
• Electrical: the electrical characteristics varies with the moisture content ; is still used when mechanical strength is required
• Chemical Properties: good resistance to alkalis, inorganic compounds and solvents