| Property | POM c | POM h | PET | PA 6 | PA6 G | PA6 GHR | PA6 Goil | PA 66.6 | PA 66 | PA6 GF | PA 11 | PES | PSU | unit | test met. |
| Density | 1,41 | 1,42 | 1,38 | 1,14 | 1,15 | 1,15 | 1,14 | 1,14 | 1,14 | 1,30 | 1,04 | 1,36 | 1,24 | g/cm3 | ISO.1183 DIN.53479 |
| Water absorption of 50% in air r.h. | 0,2 | 0,2 | 0,2 | 2,8 | 2,4 | 2,2 | 1,5 | 2,6 | 2,6 | 2 | 0,9 | 0,8 | 0,3 | % | – |
| Absorption 23Cin watersaturation | 0,7 | 0,7 | 0,5 | 9,0 | 7,0 | 6,0 | 4,8 | 8,4 | 8,0 | 5,2 | 2 | 2,0 | 0,6 | % | – |
| Mechanical properties | POM c | POM h | PET | PA 6 | PA6 G | PA6 GHR | PA6 Goil | PA 66.6 | PA 66 | PA6 GF | PA 11 | PES | PSU | unit | test met. |
| Tensile stress at yeld at break | 66 | 69 | 85 | 54 (80) | 58 (85) | 60 (90) | 50 (70) | 58 (86) | 61 (88) | 100 (130) | 45 | 82 | 70 | N/mm2 | ISO.527 DIN.53455 |
| Elongation at break | 50 | 50 | 50 | 180 (60) | 100 (20) | 100 (20) | 120 (35) | 160 (45) | 150 (40) | 20 | 270 | > 50 | > 50 | % | ISO.527 DIN.53455 |
| Tensile modulus of elasticity | 2700 | 2900 | 3100 | 1700 (3000) | 1900 (3400) | 1900 (3500) | 1700 (3100) | 1800 (3100) | 1900 (3200) | 4000 | 1800 | 2600 | 2500 | N/mm2 | ISO.527 DIN.53455 |
| Compression test 1% strain 1000h | 14 | 14 | 20 | 6 (18) | 7 (20) | 6 (20) | 6 (19) | 7 (20) | 7 (20) | 15 (28) | 4 | 20 | 13 | N/mm2 | ISO.899 DIN.53444 |
| Impact strength Charpy 7,5 J | n.b. | n.b. | n.b. | n.b. | n.b. | n.b. | n.b. | n.b. | n.b. | n.b. | n.b. | n.b. | n.b. | KJ/m2 | ISO.R179 DIN.53453 |
| Notched impact strength Charpy | 9 | 11 | 5 | 25 (5) | 23 (5) | 23 (5) | 25 (8) | 20 (5) | 18 (5) | 10 | 20 | 8 | 15 | KJ/m2 | ISO179/3C DIN.53453 |
| Ball identation hardness | 140 | 150 | 170 | 80 (155) | 100 (165) | 100 (170) | 80 (150) | 100 (170) | 100 (170) | 170 (210) | 100 | 150 | 140 | N/mm2 | ISO2039.1 DIN.53456 |
| Rockwell hardness (dry) | M88 | M92 | M95 | M85 | M88 | M88 | M82 | M88 | M89 | M95 | M83 | M89 | M69 | – | ISO2039.2 |
| Coefficient of friction to steel | 0,30 | 0,30 | 0,25 | 0,42 | 0,42 | 0,40 | 0,34 | 0,40 | 0,42 | 0,50 | 0,36 | 0,40 | 0,45 | – | – |
| Thermal properties | POM c | POM h | PET | PA 6 | PA6 G | PA6 GHR | PA6 Goil | PA 66.6 | PA 66 | PA6 GF | PA 11 | PES | PSU | unit | test met. |
| Melting point | 165 | 175 | 255 | 220 | 220 | 220 | 220 | 240 | 255 | 220 | 183 | A | A | – | – |
| Thermal conductivity | 0,30 | 0,30 | 0,28 | 0,25 | 0,28 | 0,28 | 0,28 | 0,26 | 0,25 | 0,25 | 0,23 | 0,18 | 0,26 | W/(Km) | DIN.52612 |
| Deformation at temperature HDT | 115 | 135 | 95 | 83 | 96 | 96 | 90 | 88 | 103 | 150 | 55 | 195 | 174 | °C | ISO.75 DIN.53461 |
| Linear expansion coefficiente 23-60°C | 110 | 110 | 70 | 90 | 80 | 80 | 80 | 85 | 85 | 50 | 100 | 60 | 60 | 10-6.K-1 | – |
| Operating temperature continuously | 110 | 100 | 115 | 88 | 100 | 100 | 100 | 92 | 95 | 105 | 85 | 180 | 150 | °C | – |
| Operating temperature short period-no load | +140 | +145 | +170 | +150 | +160 | +160 | +160 | +160 | +165 | +170 | +120 | +220 | +180 | °C | – |
| Minimum operating temperature | -50 | -50 | -20 | -40 | -30 | -30 | -30 | -30 | -30 | -30 | -50 | -50 | -50 | °C | – |
| Flammability UL 94 (3-6 mm thickness) | HB | HB | HB | HB- V2 | HB V2 | HB | HB | HB- V2 | HB- V2 | HB V2 | V2 | V0 | HB V2 | – | UL 94 |
| Oxigen index (LOI) | 15 | 15 | 22 | 24 | 25 | 25 | 25 | 27 | 25 | 24 | 22 | 38 | 32 | % | ISO.4589 |
| Electrical properties | POM c | POM h | PET | PA 6 | PA6 G | PA6 GHR | PA6 Goil | PA 66.6 | PA 66 | PA6 GF | PA 11 | PES | PSU | unit | test met. |
| Dielectric constant at 1 MHz. | 3,8 | 3,7 | 3,2 | 7 (3,6) | 7 (3,7) | 7 (3,7) | 7 (3,7) | 8 (4) | 7 (3,6) | 7 (3,6) | 4 | 3,6 | 3,1 | – | ISO.250 DIN.53483 |
| Dielectric strength | 50 | 32 | 60 | 25 | 30 | 30 | 30 | 22 | 25 | 25 | 40 | 60 | 25 | kV/ mm | ISO.243 DIN.53481 |
| Volume resistivity | 1015 | 1015 | 1016 | 1012 | 1012 | 1012 | 1012 | 1012 | 1012 | 1012 | 1015 | 1017 | 5X1016 | Ohm.cm | ISO.93 DIN.53482 |
| Dissipation factor tan Δ at 1MHz | 0,01 | 0,01 | 0,01 | 0,06 | 0,05 | 0,05 | 0,05 | 0,06 | 0,06 | 0,06 | 0,05 | 0,01 | 0,02 | – | ISO.250 DIN.53483 |
Select one or more category
In this section, you can find all the materials we produce; selecting one or more features and clicking the search botton, you can see the related materials.
Are you a distributor?
Do you want to have your login credentials to access the reserved area?